Custom and Semi-Custom Boards
If our standard products do not match your requirements Wiblock
Engineering Services can do
custom and semi-custom designs. Peripherals can be added to existing
Wiblock design, a device prototyped with a Wiblock product can be
converted into a custom product or a full custom design to your
specifications can be built.
Specials
Wiblocks is Maker #4228 at the 1st Annual World Maker Faire New York
2010! Please drop by and say hello.
| PICO1TR
| $12
| 328, Adj. Regulator (3.3V or 5V operation)
|
| PICO1TRC
| $35
| 328, RTC with battery backup, Adj. Regulator (3.3V or 5V operation), FTDI-TTL-232R-3V3 cable
|
| NB1A
| $31.41
| 328, USB, Regulator, RTC, Quad DAC
|
| NB1
| 2 for $31.41
| 168/328, USB, Regulator
|
| ZB1-PB1
| $15
| Prototyping board for the ZB1 and NB1 (will work with the NB1A)
|
PICO
The
PICO1TR
is a physical
computing board that is compatible with the Arduino software
environment. The board size is 2.1" x 1".
All I/O pins from
the ATmega168 (or ATmega328) are brought out on 2 rows of 14 pins
(300mil spacing).
The video (right) shows a
PICO1TR
mounted to a
PICO1TR-LED-S LED matrix. The 10x10 matrix requires eleven I/O
lines. The remaining nine ATmega168/328 I/O lines are connected to a
header. The LEDs are mounted on the bottom side of the
PICO1TR-LED-S and the PICO1TR is on the opposite side.
The video (below) shows a
PICO1TR
mounted to a
PICO1TR-LED-L LED
matrix. The 8x8 matrix requires nine I/O lines. The remaining eleven ATmega168/328 I/O lines
are connected to a header.
Kits containing the initial build of PICO1TR PCBs are on sale for $12 each. Once
these are gone the price will be $15 each in singles and $12 each in
groups of 10.
ZB1-PB1 Closeout
The ZB1-PB1, which works with the ZB1 and NB1, is being replaced.
All of the ZB1-PB1 kits are on sale for $15.
The kits are $10 if purchased with a ZB1-KIT or NB1-KIT.
The sale lasts until all of the PCBs are gone.
NB2 System -- Sanguino Compatible, RTC, DAC, Altoids Compatible
The
NB2 System
is a physical computing
development system that is compatible with the Arduino/Sanguino
tools. Sized perfectly to fit in your empty Altoids tins.
The picture on the right shows an NB2A connected to a NB2A-PB1 with an
IDE ribbon cable. Additional boards can be connected with the same
cable.
Snowy Creations
You can now purchase
Snowy
Creations products using the Wiblock shopping cart. Two sites, one
shopping cart, one shipment.
New for this year at
Snowy Creations
is a
Make-Your-Own Penguin
kit.
International Shipping
New domestic and international
shipping
options have been added.
NB1A
The
NB1A consists of an NB1, a
four channel DAC and real-time clock (RTC) with a battery backup. The
NB1A is compatible with the Arduino software environment. For system
development a variety of peripheral modules are available (including
all of the
ZB1 peripherals).
An additional eight pin I/O connector is added for the DAC channels
and the interrupt outputs of the RTC.
NB1
The
NB1
features the
microcontroller circuitry of the
ZB1
without the on-board
radio. There is an additional UART connector for serial peripherals
(e.g. radio modules). A Bluetooth and an XBee module are planned for
Q4-2009. Like the
ZB1
the
NB1
is compatible with the Arduino
software environment. For system development a variety of peripheral
modules are available (including all of the
ZB1
peripherals).
ZB1 Peripherals
The
ZB1-PB1
and
ZB1 LCD Interface
are in stock.
ZB1
The
ZB1 System is a set of
physical computing development tools that are compatible with the
Arduino software environment. The ZB1 combines an ATmega168 processor
and a MaxStream XBee Zigbee radio on a single printed-circuit board
(PCB).
