PICO1B - 1.45" x 0.8"
The PICO1B is a physical computing board that is compatible with the
Arduino software environment. 1.45 x 0.8 inches all I/O pins from the
ATmega168 (or ATmega324) are brought out on 2 rows of 14 pins (300mil
spacing).
- 1.45 x 0.8 inches.
- Compatible with the Arduino development tools.
- ATmega168 running at 12MHz (Vcc 3.3V - 5V)
- A/D reference supply filtered per Atmel specification.
- Reset circuit per Atmel specification.
- Six pin header for FTDI TTL-232R cable.
- LED that can be jumpered from either Pin 7 or Vcc.
Educational Kits and Rapid Prototyping Tools
