Wiblocks --- PICO1TR

PICO1TR - 2.1" x 1"

The PICO1TR is a physical computing board that is compatible with the Arduino software environment. The board size is 2.1" x 1". All I/O pins from the ATmega168 (or ATmega328) are brought out on 2 rows of 14 pins (300mil spacing). See the PICO1TR datasheet for the assembly instructions, schematic and bill-of-materials.

The PICO1TR is available in panels called a PICO1TR PANEL Each panel consists of ten PICO1TR pcbs arranged with v-scores between the rows and columns to enable individual PCBs to be separated after after the panel is assembled. The individual PCBs are arranged in two groups of five. When split vertically at the center both halves are identical. There is a 125mil keepout area around the periphery of the panel and two 125mil keepout areas between the halves.

Features

Pricing

Part Number Description Price | Qty

PICO1TR-KIT datasheet Small, low-cost ATmega328 Kit (prototype PCB) 10.00USD |  1

PICO1TR-KIT-2-F datasheet 2 PICO1TR-KIT's + FTDI-TTL-232R-3V3 Cable 35.00USD |  1

PICO1TR-PANEL PCB panel containing ten PICO1TR PCBs 30.00USD |  1

PICO1TR-PANEL-WW PICO1TR-PANEL plus ten sockets 50.00USD |  1

PICO1TR-PANEL-KIT PICO1TR-PANEL and all components to build ten PICO1TR boards 90.00USD |  1

Accessories

The FTDI USB to Serial Cable TTL-232R-3V3 is required to program the PICO1TR. If the board is configured for 5V operation then either the 3.3V or 5V FTDI cable will work.

Part Number Description Price | Qty

FTDI-TTL-232R-3V3 datasheet USB to RS232 (3.3V TTL) 20.00USD |  1

PICO1TR-KIT Component List

Item Number Quantity Description

1 4 capacitor, ceramic, 0.1uF, 10%, 50V, X7R
2 2 capacitor, ceramic, 20pF
3 2 capacitor, Nichicon UPW1E100MDD
4 1 diode, 1N4148
5 1 LED, T1, Green

6 1 header, 3x1, 100mils
7 1 header, 6x1, 100mils
8 1 power jack, 2.1mm
9 1 inductor, 10uH, 10%
10 2 resistor, 10K, 1/8W, 1%

11 1 resistor, 374 Ohm, 1/8W, 1%
12 1 resistor, 124 Ohm, 1/8W, 1%
13 1 resistor, 205 Ohm, 1/8W, 1%
14 1 pushbutton
15 1 ATmega168-20PU

16 1 voltage regulator, adj, 800mA, TO-220
17 1 crystal, 12MHz, 20pF, HC49US
18 1 Shunt with handle
19 1 DIP Socket, 28 Pin, 300mil centers, Wire Wrap
20 1 wiblock_PICO1TR-PCB

21 1 resistor, 1K, 1/8W, 1%