Products

• NB1 System
•   NB1
•   NB1A
• NB2A System
•   NB2A
•   NB2A-PB1
•   NB2A-TB1
• ZB1 System
•   ZB1
•   ZB1 Proto Boards
•   ZB1 LCD Boards
• PICO
•   PICO1B
• XB2 XBee Interface

Application Hints

• ZB1 Assembly Instructions

      Rev 1, 2   Rev 3

• AVR and Arduino Tools
• Sanguino Tools
• Boards.txt Updates
• Changes for NewSoftSerial
• Bootloader
• Blink (a.k.a. Hello World)
• LCD Example
• XBee Receiver
• XBee Transmitter
• ZB1-LCD2 Transmit/Recieve
• FTDI Level Translator
• Software Reset

Libraries

• DAC (TLV5620)
• DAC (TLV5618)
• LED_debug
• NCO
• RTC
• SPI
• TWI

Errata

• Reset Circuit Update

PICO1B

• 1.45" x 0.8"
• Replaceable and upgradeable CPU
• Compatible with the Arduino development tools.
• Adjustable Linear Regulator (Vcc 3.3V - 5V) Output voltage is set by changing one resistor. Resistors for 3.3V and 5V are included.
• ATmega328 running at 12MHz (Vcc 3.3V - 5V)
• Two rows of 14 pins (300mil spacing) with all ATmega168 I/O functions.
• Six pin header for FTDI TTL-232R cable.
• Debug LED that can be jumpered to Pin 7 or disconnected.
• A/D reference supply filtered per Atmel specification.
• Reset circuit per Atmel specification.